Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in The Colony, TX
A Level 2 chimney inspection and cleaning in The Colony typically runs $199-$289 for a standard factory-built fireplace and includes a camera scan of the flue, written price before work starts, and a documented photo record. We’re at (940) 290-7230 if you want to book or talk through what your unit needs.
The Colony’s concentration of 30-to-45-year-old prefab metal fireplaces means every sweep here doubles as a condition assessment. These units were built with 20-to-30-year design lives, and most have aged past that marker. Our crews carry replacement refractory panels and chimney caps for common Heatilator and Superior models, and we quote panel swaps or cap replacements in writing before any work starts.
Why The Colony Homes Are Different
The Colony was built almost entirely as a master-planned community from the late 1970s through the mid-1990s. That produced a dense stock of factory-built metal fireplaces, not traditional masonry, now well past their rated service life. In neighborhoods like The Colony Pointe and Stewart Peninsula, we regularly find homeowners who’ve burned for decades without realizing their fireplace is a UL-listed prefab unit with specific replacement-part requirements.
The city’s position on the south shore of Lewisville Lake adds chronic moisture exposure that inland DFW suburbs don’t face. Humidity drives faster rust in firebox panels, accelerates mortar degradation in the few masonry chimneys that do exist, and rots out chimney caps at rates we don’t see in Frisco or Plano. Combine that with North Texas’s pattern of 15-to-25 burn days per year, and fireplaces sit idle through long humid stretches - perfect conditions for birds, squirrels, and wasps to colonize uncapped flues before November’s first fire.
Our Main The Colony Services
Most calls from The Colony homeowners fall into three categories: routine sweep and inspection, repair of aging prefab components, and fireplace troubleshooting.
Chimney Cleaning & Sweep in The Colony
Our standard visit includes an NFPA 211 Level 2 inspection with camera scan, creosote removal, and a written condition report with photos. For The Colony’s prefab-heavy housing stock, we also verify refractory panel integrity and check for rusted firebox panels that are routine in 35-year-old units. Chimney Cleaning & Sweep in The Colony
Chimney Repair in The Colony
We replace cracked crowns, deteriorated caps, and spalling brick on the few masonry chimneys here, plus handle the prefab-specific work The Colony actually needs: rusted firebox replacement, damaged chase cover swaps, and deteriorated termination seal repair. Every repair gets a written scope, written price, and photo documentation. Chimney Repair in The Colony
Fireplace Services in The Colony
Gas log installation, pilot light troubleshooting, and insert upgrades for factory-built fireplaces make up most of our fireplace work in The Colony. We size inserts to existing prefab firebox dimensions and verify clearances per manufacturer specs, not guesswork. Fireplace Services in The Colony
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Cap & Crown in The Colony
Chimney cap and crown work in The Colony addresses a specific local failure pattern: lakefront humidity plus decades of thermal cycling have destroyed caps and cracked crowns on prefab and masonry chimneys alike. We install Gelco and Olympia Chimney caps sized to multi-flue and single-flue configurations, and we repair or coat crowns before water reaches the flue liner. Chimney Cap & Crown work follows Haven Standard Clause 1: written price, written scope, written warranty before any tool touches the chimney.
Cap Replacement
Signs you need it
Rust stains on the chase, water in the firebox, or a cap that’s missing, screen-clogged, or visibly corroded means replacement is past due.
What it costs in The Colony
Standard single-flue cap replacement runs $180-$340 installed; multi-flue caps or custom chase covers range $340-$620.
How we do it
We measure the flue or chase opening, verify draft requirements, install a stainless steel or copper cap with proper screen clearance, and photo-document the fit.
Crown Repair
Signs you need it
Hairline cracks spreading across the crown surface, chunks missing at the edges, or water pooling on top instead of shedding indicate crown failure.
What it costs in The Colony
Crown crack sealing and resurfacing typically costs $280-$480; full crown rebuilds run $620-$1,100 depending on chimney width.
How we do it
We grind out cracks, apply bonding agent, pour new crown mix with proper overhang and drip edge, then cure and seal.
What Chimney Cap & Crown Costs in The Colony
| Item | Typical range in The Colony |
|---|---|
| Single-flue cap replacement | $180 - $340 |
| Multi-flue cap / chase cover | $340 - $620 |
| Crown crack repair / coating | $280 - $480 |
| Full crown rebuild | $620 - $1,100 |
Can a cracked crown wait until next season?
Not safely in The Colony’s climate; freeze-thaw cycles through winter expand cracks and let water reach the flue liner, turning a $300 coating into a $2,000+ liner job. We photo-document the crack depth and show you before you decide.
Do I need a cap if my chimney is factory-built?
Yes, prefab chimneys require manufacturer-approved termination caps, not generic hardware-store covers; the wrong cap traps heat, voids the UL listing, and creates a fire hazard. We source caps through our Haven buying network to match your unit’s specs.
Chimney Liner & Rebuild in The Colony
Chimney liner and rebuild work in The Colony centers on two realities: prefab metal fireplaces with failed factory liners that need complete replacement, and the occasional masonry chimney with clay flue tiles cracked by thermal shock or moisture infiltration from Lewisville Lake’s humid microclimate. Chimney Liner & Rebuild quotes include a camera inspection to verify liner condition before we recommend anything.
Stainless Steel Liner
Signs you need it
Visible gaps or cracks in clay flue tiles, pieces of tile in the firebox, or a failed NFPA Level 2 camera inspection indicate liner replacement.
What it costs in The Colony
Stainless steel liner installation runs $1,800-$3,200 for a standard single-flue system, including insulation and top plate.
How we do it
We measure the flue, select a DuraFlex or Olympia Chimney liner sized to the appliance, insulate per manufacturer specs, and pressure-test the connection.
Partial Rebuild
Signs you need it
Spalling brick above the roofline, a leaning chimney stack, or separated mortar joints visible from the ground mean structural failure.
What it costs in The Colony
Partial rebuilds from the roof up typically range $2,400-$4,800 depending on height and brick matching requirements.
How we do it
We scaffold the work area, remove damaged courses to sound masonry, rebuild with matched brick, install a new crown, and flash to the roofline.
What Chimney Liner & Rebuild Costs in The Colony
| Item | Typical range in The Colony |
|---|---|
| Stainless steel liner (single flue) | $1,800 - $3,200 |
| Flexible liner (offset flue) | $2,200 - $3,800 |
| Partial rebuild (roof up) | $2,400 - $4,800 |
| Full chimney rebuild | $6,500 - $12,000 |
Does every old chimney need a new liner?
No; we camera-inspect first and only recommend replacement when the liner fails NFPA 211 standards or shows gaps, cracks, or missing sections that we can show you on screen. Call (940) 290-7230 for a free inspection.
Can you match brick from a 1985 build?
We source through Haven’s buying network and local salvage yards; close matches are usually achievable for The Colony’s common 1980s tract-home brick, though exact matches may require tinting.
Brands We Service in The Colony
We stock and install caps, liners, and repair materials from HeatShield, Gelco, Olympia Chimney, and Famco, with most common prefab replacement parts available without special-order delays. our brands
Pricing for Chimney Cleaning in The Colony, TX
| Service | Typical range in The Colony |
|---|---|
| Standard sweep & Level 2 inspection | $199 - $289 |
| Heavy creosote / Class III removal | $280 - $420 |
| Single-flue cap replacement | $180 - $340 |
| Multi-flue cap / chase cover | $340 - $620 |
| Crown crack repair / coating | $280 - $480 |
| Full crown rebuild | $620 - $1,100 |
| Stainless steel liner | $1,800 - $3,200 |
| Flexible liner | $2,200 - $3,800 |
| Partial rebuild | $2,400 - $4,800 |
| Full chimney rebuild | $6,500 - $12,000 |
Price drivers in The Colony include roof access difficulty on two-story 1980s builds, prefab parts availability for discontinued models, and the extent of moisture damage from lakefront exposure. Every quote is written and agreed before work starts, per Haven Standard Clause 1.
Neighborhoods We Serve in The Colony
We dispatch crews throughout The Colony from our Dallas-Fort Worth office, with scheduling typically available within a few business days during peak pre-season periods.
- Stewart Peninsula
- The Colony Pointe
- Castle Hills
- Harbor Point
- Bridgewater
Service Area - Cities Near The Colony
Our crews cover The Colony and surrounding communities including Lewisville, TX to the west, Carrollton, TX to the south, Plano, TX to the east, and Frisco, TX to the north. Scheduling and dispatch are coordinated from our Dallas-Fort Worth office.
Serving The Colony, TX - Our Local Coverage Area
We’re based in the The Colony area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in The Colony
Most chimney repairs and liner replacements require a permit through the City of The Colony’s building department; we pull permits as part of our scope when they’re required and include the cost in your written quote.
NFPA 211 recommends annual inspection; for The Colony’s prefab units past design life, we suggest inspection every year and sweeping whenever creosote exceeds 1/8 inch, which we measure and photo-document during the Level 2 camera scan.
Either works; our phones are answered live 24/7 at (940) 290-7230, or you can request an appointment through our site. We’ll confirm with a text and send technician details before arrival.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What The Colony Customers Say
"Found a bird nest and a blocked flue we had no idea about. Photographed everything, cleared it, and explained what the smell had been."
- Curtis V."Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O."We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D.