Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFamco Chimney Liner & Rebuild in Frisco: What to Know First
We provide independent Famco chimney liner and rebuild service in Frisco, with most liner replacements completed in one day and full rebuilds scheduled across two to three days depending on weather. Every job starts with a written price before work begins - no exceptions - and includes a camera-scan inspection with documented photo record under Haven Standard Clause 4. If you own a Famco stainless steel liner, flexible liner, or factory-built chimney system in Frisco, Starwood, or nearby, we can inspect, repair, or replace it using OEM or quality aftermarket parts sourced through our buying network. Call (940) 290-7230 for a free estimate or second opinion on any written quote you’ve already received.
How Famco Products Fail - and How We Fix Them
- Famco 316Ti flexible liners in homes built 2015-2019: The corrugated sections flatten at the first offset above the smoke chamber, especially in Frisco’s clay-heavy soils where foundation shift is common. We find this with the camera about 30% of the time in Starwood and Newman Village inspections. Our fix is a rigid 316Ti replacement through the offset, with a custom-fabricated transition piece - not another flexible run that’ll do the same thing in three years.
- Famco galvanized outer wall on pre-2010 factory-built chimneys: The outer jacket rusts from the inside out where condensation collects at the chase pan. Homeowners smell it before they see it - a metallic, damp odor after rain. We strip the damaged section, inspect the inner liner for breach, and rebuild with a stainless outer wall and proper cricket detail to shed water away from the chase.
- Famco multi-flue caps with integrated spark arrestors: The 304 mesh corrodes at the weld points faster than the cap body, dropping sparks and debris into the flue below. We’ve replaced dozens in Frisco’s older Stonebriar and Panther Creek builds. We install a standalone 316 stainless cap with removable mesh - easier to sweep, easier to inspect, and it outlasts the integrated design.
- Famco oval-to-round adapters in direct-vent conversions: The adapter seam separates where the oval section meets the round liner, usually from thermal cycling during shoulder seasons when the appliance short-cycles. We find white efflorescence on the exterior chase wall as the first visible sign. Our repair is a welded custom adapter with expansion relief, not another slip-fit part.
- Famco air-cooled chimney systems with blocked combustion air inlets: Stucco or siding contractors seal the air gap during exterior renovations, turning a designed air-cooled system into an overheated single-wall pipe. The liner warps at the thimble penetration. We open the air gap, replace the warped section, and document the correction for the homeowner’s insurance file - because this one is usually a third-party damage claim.
Our Famco Chimney Liner & Rebuild Process
- 1
Camera-scan inspection (NFPA 211 Level 2): We run the camera the full flue length, record the footage, and mark timestamps for any breach, deformation, or creosote buildup. You see what we see.
- 2
Written findings with hand-sketched flue diagram: Corrine still sketches each flue by hand in a field notebook - measurements, offsets, and material notes - before any price is calculated.
- 3
Parts decision: OEM Famco vs. quality aftermarket: If Famco OEM is available at honest lead time, we quote it. If not, we specify DuraFlex, HeatShield, or Gelco equivalents with compatible ratings, and we explain the warranty difference in writing.
- 4
Written price, scope, and warranty delivered before work starts: Haven Standard Clause 1 - “Have it in writing.” No verbal quotes, no “we’ll figure it out when we get there.”
- 5
Repair or rebuild with photo documentation: Every stage photographed: before, during, after. The photo record becomes Clause 4 documentation and your personal archive.
- 6
Smoke test or draft reading, then cleanup: We verify the repair under operating conditions, log draft pressure or smoke clearance time, and leave the work area cleaner than we found it.
BeforeAfterWhat Famco Chimney Liner & Rebuild Costs in Frisco
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Famco liner repair (sectional replacement, single offset) | $1,800 - $3,200 | Height of chimney, access difficulty, whether the damper needs reworking |
| Famco full flexible liner replacement (316Ti) | $3,500 - $5,800 | Flue diameter, number of offsets, need for new top plate or cap |
| Famco partial rebuild (chase wall + liner, above roofline) | $4,200 - $7,500 | Chase dimensions, stucco vs. siding match, scaffolding requirements |
| Famco full chimney rebuild (tear-down to roofline) | $8,500 - $14,000 | Foundation condition, hearth extension rebuild, permit complexity in Frisco |
These are Frisco-market ranges based on jobs we’ve completed in Starwood, Newman Village, and along Preston Road. The only way to get your exact price is a camera inspection - estimates are free, and we honor our Free Second Opinion on any competitor’s written quote. Call (940) 290-7230 to schedule.
Why Frisco Homeowners Call Level Two Chimney Frisco for Famco Work
We’ve inspected and cleaned more than 38,000 chimneys since 2009, and the camera doesn’t guess. Neither do we. Every Famco job we take in Frisco gets the same documentation standard: footage, photos, written scope, written price, written warranty. Our 365-Day Done Right Promise means if it’s not right, we make it right - no argument, no delay. Our technicians are background-checked, uniformed, and licensed; you get a name and a text when they’re en route. Because we buy through Haven’s network across multiple brands - DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield - we can source the right part without inflating the price for brand exclusivity. Corrine Halstead and her crew have worked Frisco long enough to know which chase designs in which neighborhoods fail first, and we use that knowledge to keep your estimate honest and your repair lasting.
FAQs
The original Famco warranty on factory-built components typically expires after 10-15 years, and most Frisco homes with these systems are past that window. As an independent Famco service provider, our work carries its own warranty under the Haven Standard - your 365-Day Done Right Promise and written warranty on parts and labor. We document everything so you have a clear record regardless of original coverage status. Call (940) 290-7230 if you want us to review your installation date and warranty paperwork.
Most Famco flexible liner replacements are completed in one day, with the crew arriving between 8 and 9 a.m. and finishing by late afternoon. Full rebuilds take two to three days depending on Frisco weather, permit inspection scheduling, and whether we’re matching existing stucco or siding. We give you a written timeline with the price - no surprises. Call (940) 290-7230 for availability.
Yes, though some pre-2010 Famco components are discontinued from the OEM. We source compatible replacements through our Haven buying network - DuraFlex for liners, Gelco for caps, HeatShield for refractory repair - and we specify the rating match in writing so you know the replacement meets or exceeds the original. If OEM Famco is available, we quote it; if not, we explain the aftermarket option before you decide. Call (940) 290-7230 to discuss your specific model.
The camera decides, not us. A single breach in a Famco liner, localized rust, or a failed cap is usually repairable. Multiple breaches, a shifted foundation crack through the chase, or a liner that has separated at multiple joints typically means rebuild. We show you the footage, explain the threshold, and quote both options when it’s close. No work starts until you have the written price and the photo evidence in hand. Call (940) 290-7230 for a free inspection.
A breached Famco liner can leak combustion gases including carbon monoxide into wall cavities or living space, and creosote leaking through liner gaps creates a fire path in the chase structure. In Frisco’s hard-freeze winters, water infiltration through a failed crown or chase pan accelerates freeze-thaw damage to the surrounding structure. That said, we don’t invent urgency - we show you the camera footage, explain the actual risk level for your specific breach, and note which repairs can safely wait a season versus which should be scheduled before the next burn. Call (940) 290-7230 and we’ll give you an honest timeline.
Written by Corrine Halstead, Owner, Level Two Chimney Frisco at Level Two Chimney Frisco, serving Frisco and nearby areas.