Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Liner & Rebuild in Frisco: What to Know First
We provide independent Olympia Chimney chimney liner and rebuild service in Frisco, with most liner replacements completed in one day and full rebuilds typically scheduled within a week of your camera inspection. Every job starts with a written price, written scope, and written warranty before any work begins - no exceptions, no surprises. If you own an Olympia Chimney liner system and you’re seeing rust stains on the exterior brick, smelling smoke in the house, or your inspector flagged gaps or spalling in the flue, this page covers what actually happens next and what it costs. Call (940) 290-7230 to book your NFPA 211 Level 2 inspection or bring us a competitor’s written estimate for a free second opinion.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia 316Ti stainless flex liners in the OFC series develop crevice corrosion at the collar welds where Frisco’s clay-heavy soil moisture wicks into exterior chase walls. We see this most in homes near Stewart Creek, where water tables run higher. Our fix: cut back to sound metal, transition with a DuraFlex Pro section where the original collar geometry is compromised, and document the joint with photos per Haven Standard Clause 4.
- Olympia rigid 304 stainless liners (ORC series) separate at telescoping joints after thermal cycling, especially in two-story Frisco homes where the flue run exceeds 25 feet and the chimney sits on an exterior wall. The gap is often invisible from the firebox. We drop a camera to confirm the separation point, then either reseat with an expansion joint or replace the affected section with Gelco rigid where the original Olympia sleeve is too distorted to seal.
- Olympia Heat-Fab Saf-T Liner transitional installs - common in 2016-2019 Frisco new construction - used a lighter-gauge alloy at the smoke chamber that doesn’t tolerate Class III glazed creosote. The inner wall honeycombs and flakes. We remove the damaged section, parget the smoke chamber with HeatShield Cerfractory Foam if the corbeling is intact, and sleeve with a heavier DuraFlex 316Ti from the damper up.
- Olympia chimney caps with integrated spark arrestors clog with cottonwood debris from Frisco’s mature neighborhoods like Starwood and Newman Village. Moisture then ponds and accelerates crown spalling above the liner termination. We replace the cap with a Famco model sized for proper draft, re-pour or seal the crown with CrownSeal, and verify liner draft with a manometer before we leave.
- Olympia clay flue tile systems in pre-2010 Frisco homes - often relined with Olympia flex as a “solution” - suffer from improper sizing where the original 8×12 clay was replaced with a 6-inch flex in a fireplace serving an open-hearth Rumford. The flue is too small; smoke spills at startup. We calculate the actual fireplace opening volume, spec the correct Olympia or Gelco liner diameter, and if the masonry is too far gone, quote a partial rebuild with proper flue sizing from the start.
Our Olympia Chimney Chimney Liner & Rebuild Process
- 1
Level 2 inspection with camera documentation. We run a chimney-scan camera the full flue length, record the footage, and mark timestamps for any liner breach, joint separation, or creosote classification. You get the photos; Clause 4 of the Haven Standard requires it.
- 2
Written findings with hand-sketched flue diagram. Corrine still sketches each flue by hand in a field notebook - a habit from her Queensborough Community College training - then transfers the diagram to your written report with measurements and material specs.
- 3
Parts decision: OEM Olympia vs. quality aftermarket. We stock common Olympia fittings, but if lead times stretch or the original part is discontinued, we source DuraFlex, HeatShield, or Gelco equivalents through our Haven buying network. We explain the trade-off in writing before you decide.
- 4
Repair or rebuild with live photo record. Techs photograph each stage: old liner extraction, masonry condition exposed, new material install, and final joint. The camera doesn’t guess. Neither do we.
- 5
Draft test and final documentation. We run a smoke-pencil or manometer check, verify clearances to combustibles, and deliver your written warranty and photo archive before we pack tools.
- 6
365-Day Done Right Promise activation. If draft, odor, or liner performance isn’t right, we return and make it right. The promise is stamped on every job.
BeforeAfterWhat Olympia Chimney Chimney Liner & Rebuild Costs in Frisco
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Olympia flex liner replacement (single flue, standard height) | $2,800 - $4,200 | Flue length, number of offsets, whether the existing liner extracts cleanly or requires demolition |
| Olympia rigid liner section repair (ORC series) | $1,400 - $2,600 | Accessibility of the joint, need for scaffolding on steep roofs, crown work required to reach the termination |
| Partial chimney rebuild with new Olympia or Gelco liner | $6,500 - $11,000 | Height of rebuild, brick matching, whether the firebox and smoke chamber are salvageable |
| Full chimney rebuild (exterior stack + liner) | $12,000 - $18,500 | Linear feet of masonry, hearth extension requirements, Frisco permit and inspection scheduling |
| Smoke chamber parging + liner transition (Heat-Fab repairs) | $1,800 - $3,400 | Chamber depth, corbel geometry, whether a poured vs. sprayed application is indicated |
These are real Frisco-market ranges based on jobs we’ve completed in Starwood, Newman Village, and along Preston Road. Your written estimate locks the price before work starts - no add-ons after we’re on site. Call (940) 290-7230 for an exact quote; estimates are free.
Why Frisco Homeowners Call Level Two Chimney Frisco for Olympia Chimney Work
We’ve inspected and cleaned more than 38,000 chimneys since 2009, and the Frisco crew has handled Olympia Chimney systems in homes from the 2016 building boom through today. Corrine Halstead assigns a named technician to each job, sends a text when they’re en route, and background-checks every uniformed crew member. Our materials come through the Haven buying network - Olympia, DuraFlex, HeatShield, Gelco, Famco, Copperfield - so we’re not locked into one manufacturer’s availability or pricing. If your Olympia part is backordered, we have options that don’t leave you waiting through burn season. Every visit includes the camera scan, the photo record, and the written price before any work begins. The 365-Day Done Right Promise covers what we install. And if another company handed you a quote that doesn’t feel right, bring it in for a free second opinion.
FAQs
No - but understand the limits. As an independent Olympia Chimney service provider, we are not affiliated with or authorized by Olympia Chimney, and their OEM warranty on materials typically requires installation by their certified network. What we provide is our own 365-Day Done Right Promise on workmanship and the Haven Standard documented record, which most Frisco homeowners find more actionable than a parts-limited OEM warranty. If your liner is still under Olympia’s install warranty, we’ll note that in writing so you can make an informed choice. Call (940) 290-7230 to discuss your specific situation.
We stock common Olympia flex and rigid fittings, and our Haven buying network gives us priority access to DuraFlex, HeatShield, and Gelco equivalents if Olympia lead times stretch. Most liner replacements in Frisco are scheduled within a week of inspection. If your job is urgent - burn season opening, a real estate deadline - we’ll tell you honestly which parts route is fastest. Call (940) 290-7230 and we’ll check availability while you’re on the phone.
The camera decides, not a guess from the roof. We look for three things: liner integrity (gaps, corrosion, joint separation), masonry condition (spalling, missing mortar, leaning), and clearances to combustibles. If the masonry shell is sound and only the liner is compromised, a sleeve or replacement is sufficient. If the wythes are separating, the crown is failed, or the firebox is cracked through, partial or full rebuild is the honest recommendation - and we’ll show you the photos that prove it. Call (940) 290-7230 to schedule the inspection that answers this for your chimney.
A compromised liner allows exhaust gases, including carbon monoxide, to leak into wall cavities or living space. In Frisco’s older neighborhoods like Starwood, where chase construction was sometimes framed with combustible materials too close to the flue, a liner gap also creates a chimney fire path. We don’t scare-sell: if the camera shows a minor defect that can be monitored, we’ll say so and schedule a recheck. If it shows an active breach, we’ll document it and quote the fix. Either way, you have photos and a written price to decide from. Call (940) 290-7230 for the inspection.
We do not offer in-house financing, but we do break large rebuilds into logical phases - liner first, masonry next - with separate written prices for each, so you can pace the work without losing the documentation trail. Many Frisco homeowners also use home equity or contractor financing programs; we’re happy to provide the detailed written scope and photo documentation those lenders typically require. Call (940) 290-7230 to discuss phasing options for your project.
Written by Corrine Halstead, Owner, Level Two Chimney Frisco at Level Two Chimney Frisco, serving Frisco and nearby areas.